The Omega Speedmaster Professional, a watch synonymous with lunar exploration and horological excellence, is not immune to occasional issues. One such problem that can cause considerable consternation amongst owners is a pusher – the button used to start and stop the chronograph – that appears to be sticking out too far, or even seemingly detached. This article will explore the causes of this phenomenon, dispel common myths, and provide guidance on addressing this problem.
Speedmaster Pusher Sticking Out Too Far?
The most common reason for a Speedmaster chronograph pusher appearing "out of place" is a loosened or missing screw holding the pusher assembly in place. Unlike some watch designs where the pusher can be rotated, the Speedmaster's pusher is an assembled unit. The pusher itself is comprised of several parts: the pusher button (the part you press), a cap that sits atop the pusher mechanism, and a screw that secures the entire assembly to the case. It's crucial to understand that the cap *cannot* be rotated; its only function is to cover the pusher mechanism. Therefore, if your pusher seems abnormally extended, it's overwhelmingly likely that the retaining screw has become loose or completely detached.
This isn't a catastrophic failure; it's a relatively common, repairable issue. However, ignoring it could lead to further complications, including dust or debris entering the movement, potentially damaging the chronograph mechanism.
Do Real Omega Speedmaster's Pusher Buttons Fall Off?
While a completely detached pusher is less frequent than a slightly protruding one, it can happen. Again, the root cause is almost always a failure of the retaining screw. The robustness of the screw and its thread in the case are critical. Over time, repeated use of the pusher, coupled with impacts or general wear and tear, can weaken the screw and its hold, leading to the pusher becoming partially or fully dislodged. This is not necessarily indicative of a faulty watch, but rather a mechanical component that has reached the end of its service life.
The Speedmaster Pusher: A Closer Look
The Speedmaster pusher is a testament to Omega's engineering, but its design also presents a potential vulnerability. The relatively small retaining screw is critical to the pusher's functionality. The screw's location, often recessed and partially hidden, makes it susceptible to damage or loosening. The forces exerted on the pusher during operation, especially with forceful or abrupt presses, can contribute to the screw's loosening over time.
Speedmaster Issue: This Isn't Normal Right? Pusher Button
If your Speedmaster pusher appears abnormal – sticking out further than usual, loose, or even detached – it's not normal. This is a clear indication that the retaining screw requires attention. Do not attempt to force the pusher back into place; this could damage the mechanism further.
Omega Speedmaster Sticky Pusher Fix
While a protruding pusher is typically a screw issue, a sticky pusher presents a different challenge. A sticky pusher often indicates a problem with lubrication or debris within the pusher mechanism. This is a more complex issue that generally requires professional attention. Attempting DIY repairs on the internal mechanism risks causing more damage.
Should I Be Worried About This? Recently, the Pusher…
Yes, you should be concerned if your Speedmaster pusher is protruding, loose, or sticky. While not immediately catastrophic, it indicates a mechanical problem that should be addressed promptly to prevent further damage to the watch.
current url：https://ybhjim.e735z.com/blog/omega-speedmaster-pusher-stick-out-29613
louis vuitton pop up sydney paul newman daytona price auction